MacDermid AutotypeMacDermid Autotype
 
Membrane Touch Switch (MTS) Manufacturing - Membrane Touch Switches (MTS)
applicationThe conventional membrane switch is made from two flexible substrates. However the term "membrane switch" is used, not because both substrates are flexible, but because the top substrate must be made from a thin and pliable material. This top substrate is referred to as the "membrane layer" or "overlay film".

When pressed with an actuator or finger the two poles of the switch make direct contact. Upon release, the poles immediately separate as the flexing membrane returns to its original open state. In meeting these conditions of "normally open, push to close, and immediate opening", the switch is considered to have "momentary action".
Tactiles or non tactiles
In general terms there are two types of membrane switches, tactile and non tactile. These can be constructed as a keyboard with or without a graphic overlay. Polyester is the most popular film used in the construction of membrane switches due to its durability and high temperature properties. Autostat is a range of heat stabilised polyester films which offer high stability specification and are designed to be screen printed with conductive, graphite and dielectric inks. Autostat is an ideal film choice for printing the membrane switch layers, for further details please see the Autostat product information section.
top top
Textured polyester
MacDermid Autotype also offers a range of hardcoated, 'Autoflex' and textured 'Autotex' polyester films . These films have been designed specifically for the graphics overlay film on membrane switches. Both product ranges are screen printable on the second surface, are solvent, chemical and scratch resistant on the first surface, and can be embossed giving over 5 million actuations during their life time. For further information on Autotex and Autoflex EB please see the relevant product information sections.
top top
Related Products
Autotex InkJet Autotype Capillex 20 Autostat Autotype Capillex 25 Fototex Autotex Autotex AM Autotex DP Autotex DP
Applications
arrowDigital Printing
arrowElectronic Displays
arrowGraphic Screen Printing
arrowIndustrial Screen Printing
arrowIn Mould Decoration (IMD)
arrowMembrane Touch Switch (MTS) Manufacturing
arrowMembrane Touch Switches (MTS)
arrowProduct Labels and Nameplates
arrowFascia Panels and Overlays
arrowKeyboards, Keypads and Flexible Circuitry
arrowMTS and Fascia Panels in Medical Applications
arrowOutdoor MTS, Signage and Fascia Panels
arrowOffset and Gravure
arrowPrecision Nano Replication (PNR)
arrowPrepress Production
arrowTextile Screen Printing
home   |   about us   |   news   |   contact   |   europe   |   asia   |   americas   |   africa  |  terms & conditions   |  privacy statement  |  © MacDermid autotype 2008